Four 14-bit, 125 MSps A/D channels • Custom external clock and trigger inputs • Dual Virtex-4 FX and LX/SX FPGA architecture • QDR2 SRAM and DDR2 SDRAM • PCI-X 64-bit 133/66 MHz • Serial FPDP with optical transceivers

Enables use of 10GE as the high-performance fabric • VITA 42.3 XMC / PMC module • Xilin Virtex-II Pro FPGA • Standard 10GbE SFP+ optical interface • PCIe x 4 and PCI-X 133MHz interfaces • SDRAM • udpXG protocol offload or streamXG direct data streaming (optional)

The Industrial Automation Group of Advantech introduces two new ADAM analog input modules, the ADAM-5017P and ADAM-5018P. The ADAM-5017P has eight different independent configuration channels, supports power reverse, and also has a wide uni-polar or bi-polar input range • The ADAM-5018P is a Thermocouple Input Module which supports seven input ranges and types (J,K,T,E,R,S,B), and will filter functions to remove any unreasonable range • Both will support the High Common Mode function, which means channel-to-channel differential voltages can be up to 200 VDC • Now even more measurements, such as battery or power transducer/transmitter measurements can be achieved with this new design • Furthermore, they have over-voltage protection to avoid ranges ±60 VDC that protects the modules from power surges • Also, there is built-in TVS/ESD protection to protect the high-density, miniaturization, and complex equipment • TVS diodes avoid ESD and protect the electronic components • The ADAM-5017P and ADAM-5018P are both ADAM-5550 series expansion modules which are supported by the ADAM.Net Utility • In the Facility and Machine Automation market, these modules can withstand harsh requirements and provide ideal and cost-effective options • The ADAM-5017P and ADAM-5018P modules are now available to the market • To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information

The Industrial Automation Group of Advantech introduces the EKI-2525P, which combines a compact and rugged 5-port unmanaged Ethernet switch with Power-over-Ethernet (PoE) technology, to connect and power Ethernet devices over a single cable • PoE, which is relatively new to industrial and plant-floor applications, is a technology to transmit power plus data to remote Ethernet devices over standard twisted-pair Cat5e cables • More formally known as IEEE 802.3af internationally, this standard specifies a supply of 48 VDC at up to 15.4 W per port • With combined capabilities of an unmanaged Ethernet switch and a PoE power injector, the 5 port EKI-2525P has 4 PoE ports that are capable of supplying up to 15.4 W each • Additionally, each port can automatically detect when PoE compliant devices are attached, before supplying power, allowing the use of traditional (non-PoE) Ethernet devices if needed • Packaged in a compact and thin DIN-rail mount chassis, the EKI-2525P is ideal where panel space is limited • It is also ruggedized for demanding industrial applications, with dual 12 to 48 VDC power inputs, 4,000 VDC Ethernet ESD protection, power line surge (EFT) protection of 3,000 VDC, and features an operating temperature range of -10 °C to 60 °C to ensure system uptime • Plus, these switches are CUL (UL/CSA), CE, FCC, and RoHS/WEE certified. • For ease of maintenance, each Ethernet port is equipped with front-facing LED indicators that provide link, transmission speed, activity and PoE output status to aid in diagnosing issues with cables and attached devices • With auto-MDI/MDI-X, there is no need to use crossover cables for inter-switch connections and auto-negotiation provides optimum link configurations and compatibility with legacy devices • The EKI-2525P is ideal for connecting and powering PoE devices in harsh industrial environments and is currently available • To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information

Two Altera Stratix II GX FPGAs for I/O, routing, and processing • Two clusters of two ADSP-TS201S TigerSHARC DSPs 57.5 GOPS 16-bit fixed point, 14.4 GFLOPS floating-point processing power, four link ports per DSP at 1 GB/s each • Two link ports routed to the ATLANTiS FPGA • Two link ports routed for interprocessor communications, 24 Mb of on-chip RAM per DSP • Static superscalar architecture • Dual ATLANTiS framework • 2.5 GBps simultaneous external input and output • Four link ports at up to 1 GB each routed from the onboard DSPs, 32 LVDS pairs (64 pins), 12 channels of high-speed SerDes transceivers • Up to 1 GB of onboard DDR2 SDRAM • BittWare’s FINe PCI bridge chip, 32-bit/66 MHz PCI, GbE • One link port routed to ATLANTiS • 128 MB of flash memory for booting of DSPs and FPGA • 6U VME form factor, VITA 41/VXS (VMEbus Switched Serial)

Easy-to-use software modules to add into existing applications • Low cost, high-performance solutions, • Accepts primary radar video from hardware, network or disk recording • Scan converts in real-time to one or more display windows • PPI and A-Scan display formats at resolutions up to 1920 x 1200 • Allows underlay and overlay graphics using advanced software-based rendering • Flexible toolkit that is compatible with radar processing library • Real-time fading, multi-channels, multiple colours, advanced display processing options

Based on a 1.8 V ARM7TDMI core operating at up to 55 MHz • Integrated 64K byte flash

arsh Environment RFID Tag

tor’s choice

Built specifically to interoperate in NAC / 802.1X enabled networks, and to integrate with the authentication control place used in 802.1X • Allow authorized employees to securely create guest accounts • Supports the concepts of time and user permissions • Optional implementation of an Acceptable Use Policy • Assists in the administration of PXE Boot and imaging systems in an authenticated network

Employs patented two-phase cooling technology (SprayCool) for use in mission critical military applications • Scalable: 4-21 slots for 6U x 160 mm VME, VPX, VXS, CompactPCI or CompactPCIe (EXP.0) electronics • High performance: 100-500 W slot with optional MIL-STD-704 power • Configurable I/O panel, power supply, accepts both COTS, proprietary cards, including air cooled cards, with minimal modifications • Tested to MIL-STD-810, MIL-STD-461 • Swap: Maximizes size, weight, and power consumption at up to 2X improvement over traditional cooled enclosures • -1,500 ft. up to 100,000 ft. including unpressurized environments, -65° C to +71° C

Industrial Communication Computer • Efficient and steady • AMD GEODE LX800 500 MHz • System memory 256 MB, 64 MB VGA Small volume with core interfaces Ethernet, 2 COM, 2 USB, VGA, Audio, PS2 (KB/Mouse), 2.5'' HDD IDE Slot • Ready to use • Embedded Linux/Win CE/XPe OS ready • System Management Utility • Application Development Environment • Modbus, Modbus/TCP

Intelligent Security - Unique hardware acceleration implements the latest set of algorithms to enable future-proof designs • Extensive Networking Interfaces - Deploy our base product with five Gigabit Ethernet ports or customize with up to three SFP Connectors • Multi-core Processors - The OCTEON CN31XXX family of Multi-core MIPS64 processors targets intelligent networking • Validated OS Partners - Work with one of our existing software partners to reduce your development time • Customized Exterior - Take advantage of Lanner's extensive industrial design experience and customize this appliance to meet your unique branding requirements

Dual Freescale MPC8641D processors with support for 1.0, 1.33 and 1.5 GHz clock rate • Dual PMC/XMC mezzanine sites with support for PCIe x8, PCI/PCI-X and Serial RapidIO x4 • Up to 1 GB of DDR2 memory per core, or 4 GB of memory per board • Full serial RapidIO fabric connectivity • Xilinx Virtex-5 FPGA system control node for chassis management